For excavators with a total machine weight of 10-16 metric tons Created to cope with the extreme strain that a tiltrotator is constantly exposed to on an excavator.
Powerful cylinder solutions
Double-acting tilt cylinders can be fitted with load-holding valves for extra safe management of the load.
Oil provides the best lubrication
The worm gear will work best if immersed in an oil bath. An oil-filled rotor housing provides maximum lubrication and minimal wear and tear, which equates to a very long service life. Oil is significantly better than grease at extreme temperatures, and provides better and simpler handling when servicing.
Stability and strength
A very powerful screw joint holds the housing and worktool in a tight grip.
Longer service life
Sturdy, well-dimensioned pins, shafts and bushings make the tiltrotator from Rototilt® more robust and longer-lasting than any other tiltrotator on the market.
Smart control systems
With a Rototilt® tiltrotator you can choose the control system that optimizes your excavator and helps improve performance and handling with enhanced settings options. Your tiltrotator will operate at an optimum level even in the toughest working conditions.
Rototilt® uses a higher system pressure than other makes on the market. This means better function performance – e.g. in the important tilt and torque movement – and more clamping force when using a grapple.
Powerful worm gear
Large bearing surfaces absorb and distribute the digging force effectively.
Smart attachment fitting
Direct attachment means lower total cost, lower weight and more digging power. For maximized flexibility, we have developed our own, patented multi-fixing.
Protected hydraulic motor
The specially-designed cover for the hydraulic motor is integrated into the cast rotor housing and protects against impact damage and supports it underneath.
Right casting in the right place
A cast rotor housing is both stronger and lighter than welded alternatives. The thickness of the casting is optimized to suit the load on each part.
All solutions and details are tested and approved to maximize safety and user-friendliness. This includes everything from quality assurance of all associated components, to control systems, and the connection/unlocking of worktools.
Hydraulic Quick Connection - QuickChange™
Enables quick changes between hydraulic worktools. Thanks to our collaboration with our partners, we can offer built-in hydraulic Quick Connection in the quick coupler.
The tiltrotator you ordered is tested before delivery. All functions are controlled and guaranteed. Every Rototilt® tiltrotator is also weighed individually before it leaves the factory.
Electric swivel (option) provides the opportunity to control valves on worktools connected to Rototilt®. This enables even more advanced worktools to be used. A high-flow swivel (option) allows the use of worktools with high-flow requirements up to 200 l/min. at 300 bar.
|Machine weight||22046.23 - 35273.96 lb|
|Max bucket width||62.99 "|
|Max breakout force’||28101.12 lbf|
|Max breakout torque||163 kNm|
|Weight (from)||694.46 lb|
|Tilt angle (2x)||40°|
|Rotation speed (1 rotation per)||7 s at 60 l/min|
|Working pressure||3625.94 psi|
|Max return line pressure||290.08 psi at 70 l/min|
|Recommended hydraulic flow||80 l/min|
|Number of lubrication points||8|
|Turning torque||6048.01 lbf-ft at 3625.94 psi|
|Tilt torque singe-acting cylinders||19545.4 lbf-ft|
|Tilt torque double acting cylinders||29871.27 lbf-ft|