Rototilt® R8

For excavators with a total machine weight of 23-32 metric tons. Our largest and most powerful tiltrotator. Just like other models, it has a control system which enables advanced use. 


Powerful cylinder solutions

Double-acting tilt cylinders can be fitted with load-holding valves for extra safe management of the load.

Oil provides the best lubrication

The worm gear will work best if immersed in an oil bath. An oil-filled rotor housing provides maximum lubrication and minimal wear and tear, which equates to a very long service life. Oil is significantly better than grease at extreme temperatures, and provides better and simpler handling when servicing.

Stability and strength

A very powerful screw joint holds the housing and worktool in a tight grip.

Longer service life

Sturdy, well-dimensioned pins, shafts and bushings make the tiltrotator from Rototilt® more robust and longer-lasting than any other tiltrotator on the market.

Smart control systems

With a Rototilt® tiltrotator you can choose the control system that optimizes your excavator and helps improve performance and handling with enhanced settings options. Your tiltrotator will operate at an optimum level even in the toughest working conditions.

High performance

Rototilt® uses a higher system pressure than other makes on the market. This means better function performance – e.g. in the important tilt and torque movement – and more clamping force when using a grapple.

Powerful worm gear

Large bearing surfaces absorb and distribute the digging force effectively.

Smart attachment fitting

Direct attachment means lower total cost, lower weight and more digging power. For maximized flexibility, we have developed our own, patented multi-fixing.

Protected hydraulic motor

The specially-designed cover for the hydraulic motor is integrated into the cast rotor housing and protects against impact damage and supports it underneath.

Right casting in the right place

A cast rotor housing is both stronger and lighter than welded alternatives. The thickness of the casting is optimized to suit the load on each part.

Improved safety

All solutions and details are tested and approved to maximize safety and user-friendliness. This includes everything from quality assurance of all associated components, to control systems, and the connection/unlocking of worktools.

Hydraulic Quick Connection - QuickChange™

Enables quick changes between hydraulic worktools. Thanks to our collaboration with our partners, we can offer built-in hydraulic Quick Connection in the quick coupler.

Individual testing

The tiltrotator you ordered is tested before delivery. All functions are controlled and guaranteed. Every Rototilt® tiltrotator is also weighed individually before it leaves the factory.

Swivel

Electric swivel (option) provides the opportunity to control valves on worktools connected to Rototilt®. This enables even more advanced worktools to be used. A high-flow swivel (option) allows the use of worktools with high-flow requirements up to 200 l/min. at 300 bar.

Technical data

Machine weight 50706.32 - 70547.92 lb
Max bucket width 78.74 "
Max breakout force’ 44961.79 lbf
Max breakout torque 330 kNm
Weight (from) 1609.37 lb
Tilt angle (2x) 40°
Rotation speed (1 rotation per) 8 s at 70 l/min
Working pressure 3625.94 psi
Max return line pressure 290.08 psi at 90 l/min
Recommended hydraulic flow 105 l/min
Number of lubrication points 8
Turning torque 7891.91 lbf-ft at 3625.94 psi
Tilt torque singe-acting cylinders 37541.91 lbf-ft
Tilt torque double acting cylinders 47720.27 lbf-ft

Rototilt R8

Product sheet
Download

Rototilt tiltrotators and attachments

General brochure
Download

ICS control system

Brochure
Download