RC5 from RC™ Tiltrotators is made for excavators weighing between 14-19 tonnes, and has been designed to cope with breakout torques of up to 200 kNm. RC5 has 25% higher tilting torque than its predecessor, the R5. Tiltrotators in the Rototilt Control Series have been designed for your operating experience, energy efficiency and precision. With pressure-compensated hydraulics, you can use the tiltrotator’s functions independently of each other to deliver the best possible precision. In addition, thanks to the RC™ System proportional control system, you can control all of this in the same excavation movement.
With the RC™ Tiltrotator, we have also created better conditions for you to work with high-flow functions, as well as extended your potential to use tools that place high demands on hydraulic flows. With the RC5, you also gain access to Rototilt’s other functions, such as a rotor housing cast in a single piece and oil-filled for maximum lubrication, minimal wear and a long service life. You enjoy even more benefits in combination with the optional RC™ Joysticks and QuickChange™, as well as the SecureLock™ safety lock, which is always included as standard.
|Machine weight, min-max||14000 - 19000 kg 14000 - 19000 kg|
|Bucket width, max||1700 mm 1700 mm|
|Breakout force, max||140 kN 140 kN|
|Breakout torque, max||200 kNm 200 kNm|
|Tilt angle (2x)||40 ° 40 °|
|Rotation speed (1 revolution in)||7.0 s at 72 l/min 7.0 s at 72 l/min|
|Working pressure||25 MPa 25 MPa|
|Return line pressure, max||2.0 MPa at 100 l/min 2.0 MPa at 100 l/min|
|Recommended hydraulic flow, min||121 l/min 121 l/min|
|Rotation torque||9550 Nm 9550 Nm|
|Tilting torque, double-acting cylinders||56600 Nm 56600 Nm|
|Dimension A, Width||819 mm 819 mm|
|Dimension B, Installation height total||1228 mm 1228 mm|
|Dimension C, Length||801 mm 801 mm|
|Dimension D, Installation height||601 mm 601 mm|
We reserve the right to change specifications or designs without prior notice, and make reservations for any factual errors. Variations in the product range and equipment standards may occur from market to market. For more information concerning current product specifications, local adaptations and special equipment, please contact your nearest sales office.
The key aspect of Rototilt® QuickChange™ is the ability to switch out hydraulic tools without the need to leave the cab. By working with QuickChange™ on both the top attachment frame, as well as the bottom quick coupler, operators are able to efficiently connect and reconnect with the tiltrotator or go between the various hydraulic tool options. All options are dependent on the task at hand. The tiltrotators can also be mounted directly onto your machine, with the QuickChange™ coupler fitted to the lower part of the tiltrotator. This enables you to rapidly change any of your hydraulic tools. For your safety, the SecureLock™ safety solution is standard and with any RC series tiltrotator, you can upgrade to QuickChange™ when required.