Rototilt® R4 is our tiltrotator designed for excavators weighing between 10-16 tonnes. The R4 is built to endure the harsh environments and significant stresses it will be exposed to in your daily work. Despite its low weight and compact format, the R4 can handle breakout torques of up to 163 kNm. The worm gear means smoother running with less friction, and the rotation sensor in the end section provides more precise positioning with RPS. In addition, the R4 has a high-pressure seal and smart grease fittings with a stable design with lower radial bearings in bronze.
The Rototilt® R4 also includes Rototilt’s other functions and properties, such as an oil-filled rotor housing cast in a single piece for maximum lubrication, minimal wear and an extremely long service life. You gain access to even more benefits in combination with the QuickChange™ quick coupler system and the SecureLock™ safety solution.
|Machine weight, min-max||22045 - 35275 lb 10000 - 16000 kg|
|Weight (from)||838 lb 380 kg|
|Bucket width, max||63 in 1600 mm|
|Breakout force, max||28100 lbf 125 kN|
|Breakout torque, max||120225 ft.lb 163 kNm|
|Tilt angle (2x)||40 ° 40 °|
|Rotation speed (1 revolution in)||7.0 s at 16 gpm 7.0 s at 16 gpm|
|Working pressure||3626 psi 25 MPa|
|Recommended hydraulic flow, min||24 gpm 91 l/min|
|Number of lubrication points||6 6|
|Rotation torque||5635 ft.lb 7640 Nm|
|Tilting torque, single-acting cylinders||19545 ft.lb 26500 Nm|
|Tilting torque, double-acting cylinders||28470 ft.lb 38600 Nm|
|Dimension A, Width||28,7 in 729 mm|
|Dimension B, Installation height total||40,83 in 1037 mm|
|Dimension C, Length||27,76 in 705 mm|
|Dimension D, Installation height||19,8 in 503 mm|
We reserve the right to change specifications or designs without prior notice, and make reservations for any factual errors. Variations in the product range and equipment standards may occur from market to market. For more information concerning current product specifications, local adaptations and special equipment, please contact your nearest sales office.
With QuickChange™, you can change hydraulic tools automatically without leaving the cab. When you work with QuickChange™ in both the attachment frame at the top and the quick coupler at the bottom, you can disconnect and connect the tiltrotator or switch between different hydraulic tools quickly, easily and safely, depending on which task you have in front of you. You can also mount your tiltrotator directly on the machine and get QuickChange™ functionality for the quick coupler to change hydraulic tools quickly. In addition to saving time, this results in a safer working environment for you as a machine operator. The SecureLock™ safety solution is also always included as a standard function.Read more