The Rototilt® RC9 is our biggest tiltrotator yet, optimized for excavators weighing between 32-43 tonnes. The RC9 transforms your biggest excavators into powerful and flexible tool carriers, allowing you to take on even more tasks. This tiltrotator can handle high hydraulic flows and has an impressive 500 kNm breakout torque. With RC™ Tiltrotators pressure-compensated hydraulics, you can use the tiltrotator’s functions independently for an even precision.
The RC9 has a powerful worm gear to manage significant stresses and provide maximum torque, as well as extra hydraulics for a grapple module and other hydraulic tools, for example. In addition, thanks to the RC™ System proportional control system, you can control all the functions in one and the same excavation movement. You also gain access to Rototilt’s other functions and properties, such as an oil-filled rotor housing cast in a single piece for maximum lubrication, minimal wear and long service life. You get even more benefits in combination with the optional RC™ Joysticks and QuickChange™, as well as the SecureLock™ safety lock which is always included as standard.
|Machine weight, min-max||70550 - 94800 lb 32000 - 43000 kg|
|Weight (from)||3263 lb 1480 kg|
|Bucket width, max||94 in 2400 mm|
|Breakout force, max||62945 lbf 280 kN|
|Breakout torque, max||368780 ft.lb 500 kNm|
|Tilt angle (2x)||40 ° 40 °|
|Rotation speed (1 revolution in)||8.0 s at 33 gpm 8.0 s at 33 gpm|
|Working pressure||5076 psi 35 MPa|
|Recommended hydraulic flow, min||54 gpm 206 l/min|
|Number of lubrication points||2 2|
|Rotation torque||14085 ft.lb 19100 Nm|
|Tilting torque, double-acting cylinders||66380 ft.lb 90000 Nm|
|Dimension A, Width||53,66 in 1363 mm|
|Dimension B, Installation height total||62,28 in 1582 mm|
|Dimension C, Length||45,83 in 1164 mm|
|Dimension D, Installation height||30,43 in 773 mm|
We reserve the right to change specifications or designs without prior notice, and make reservations for any factual errors. Variations in the product range and equipment standards may occur from market to market. For more information concerning current product specifications, local adaptations and special equipment, please contact your nearest sales office.
RC4-RC9 have newly developed pressure-compensated hydraulics. This allows the tiltrotator’s various functions to work independently of each other in order to provide precise control of tilt and rotation, even if you want to operate these at different speeds. This becomes even more clear when you are using both functions at the same time. When the tilt function is operating in the maximum position, rotation can continue at the same speed as before. As a result, tiltrotators in the RC™ series provide you with optimum parallel operation, as you do not need to take the speed of rotation and tilt into account. Your operating experience becomes smoother and your movements more controlled, allowing greater precision and better results in all your tasks in the long run.
With QuickChange™, you can change hydraulic tools automatically without leaving the cab. When you work with QuickChange™ in both the attachment frame at the top and the quick coupler at the bottom, you can disconnect and connect the tiltrotator or switch between different hydraulic tools quickly, easily and safely, depending on which task you have in front of you. You can also mount your tiltrotator directly on the machine and get QuickChange™ functionality for the quick coupler to change hydraulic tools quickly. In addition to saving time, this results in a safer working environment for you as a machine operator. The SecureLock™ safety solution is also always included as a standard function.Read more