Rototilt® RC8 is the perfect tiltrotator for heavier tasks in areas such as ground and road work. RC8 is designed to handle large breakout torques of up to 330 kNm and is optimised for excavators weighing between 23-32 tonnes. All RC™ Tiltrotators have been designed for your operating experience, energy efficiency and versatility. With pressure-compensated hydraulics, you can use the tilt and rotate functions independently of each other to deliver optimum precision. Thanks to the RC™ System proportional control system, you can also control all the functions in one excavation movement.
You also gain access to Rototilt’s other functions and properties, such as an oil-filled rotor housing cast in a single piece for maximum lubrication, minimal wear and long service life. You enjoy even more benefits in combination with the optional RC™ Joysticks and QuickChange™, as well as the SecureLock™ safety lock included as standard.
|Machine weight, min-max||23000 - 32000 kg 23000 - 32000 kg|
|Weight (from)||760 kg 760 kg|
|Bucket width, max||2000 mm 2000 mm|
|Breakout force, max||200 kN 200 kN|
|Breakout torque, max||330 kNm 330 kNm|
|Tilt angle (2x)||40 ° 40 °|
|Rotation speed (1 revolution in)||8.0 s at 129 l/min 8.0 s at 129 l/min|
|Working pressure||25 MPa 25 MPa|
|Recommended hydraulic flow, min||134 l/min 134 l/min|
|Number of lubrication points||5 5|
|Rotation torque||12 Nm 12 Nm|
|Tilting torque, double-acting cylinders||64700 Nm 64700 Nm|
|Dimension A, Width||950 mm 950 mm|
|Dimension B, Installation height total||1333 mm 1333 mm|
|Dimension C, Length||920 mm 920 mm|
|Dimension D, Installation height||673 mm 673 mm|
We reserve the right to change specifications or designs without prior notice, and make reservations for any factual errors. Variations in the product range and equipment standards may occur from market to market. For more information concerning current product specifications, local adaptations and special equipment, please contact your nearest sales office.
The key aspect of Rototilt® QuickChange™ is the ability to switch out hydraulic tools without the need to leave the cab. By working with QuickChange™ on both the top attachment frame, as well as the bottom quick coupler, operators are able to efficiently connect and reconnect with the tiltrotator or go between the various hydraulic tool options. All options are dependent on the task at hand. The tiltrotators can also be mounted directly onto your machine, with the QuickChange™ coupler fitted to the lower part of the tiltrotator. This enables you to rapidly change any of your hydraulic tools. For your safety, the SecureLock™ safety solution is standard and with any RC series tiltrotator, you can upgrade to QuickChange™ when required.